diff --git a/drivers/usb/usb_ohci.c b/drivers/usb/usb_ohci.c
index da11ecb..c1aac33 100644
--- a/drivers/usb/usb_ohci.c
+++ b/drivers/usb/usb_ohci.c
@@ -73,7 +73,7 @@
     defined(CONFIG_440EP) || \
     defined(CONFIG_PCI_OHCI) || \
     defined(CONFIG_MPC5200) || \
-    defined(CFG_OHCI_USE_NPS)
+    defined(CONFIG_SYS_OHCI_USE_NPS)
 # define OHCI_USE_NPS		/* force NoPowerSwitching mode */
 #endif
 
@@ -89,13 +89,13 @@
 /*
  * e.g. PCI controllers need this
  */
-#ifdef CFG_OHCI_SWAP_REG_ACCESS
+#ifdef CONFIG_SYS_OHCI_SWAP_REG_ACCESS
 # define readl(a) __swap_32(*((volatile u32 *)(a)))
 # define writel(a, b) (*((volatile u32 *)(b)) = __swap_32((volatile u32)a))
 #else
 # define readl(a) (*((volatile u32 *)(a)))
 # define writel(a, b) (*((volatile u32 *)(b)) = ((volatile u32)a))
-#endif /* CFG_OHCI_SWAP_REG_ACCESS */
+#endif /* CONFIG_SYS_OHCI_SWAP_REG_ACCESS */
 
 #define min_t(type,x,y) ({ type __x = (x); type __y = (y); __x < __y ? __x: __y; })
 
@@ -129,13 +129,13 @@
 #define info(format, arg...) do {} while(0)
 #endif
 
-#ifdef CFG_OHCI_BE_CONTROLLER
+#ifdef CONFIG_SYS_OHCI_BE_CONTROLLER
 # define m16_swap(x) cpu_to_be16(x)
 # define m32_swap(x) cpu_to_be32(x)
 #else
 # define m16_swap(x) cpu_to_le16(x)
 # define m32_swap(x) cpu_to_le32(x)
-#endif /* CFG_OHCI_BE_CONTROLLER */
+#endif /* CONFIG_SYS_OHCI_BE_CONTROLLER */
 
 /* global ohci_t */
 static ohci_t gohci;
@@ -1819,13 +1819,13 @@
 	pci_dev_t pdev;
 #endif
 
-#ifdef CFG_USB_OHCI_CPU_INIT
+#ifdef CONFIG_SYS_USB_OHCI_CPU_INIT
 	/* cpu dependant init */
 	if(usb_cpu_init())
 		return -1;
 #endif
 
-#ifdef CFG_USB_OHCI_BOARD_INIT
+#ifdef CONFIG_SYS_USB_OHCI_BOARD_INIT
 	/*  board dependant init */
 	if(usb_board_init())
 		return -1;
@@ -1873,21 +1873,21 @@
 	} else
 		return -1;
 #else
-	gohci.regs = (struct ohci_regs *)CFG_USB_OHCI_REGS_BASE;
+	gohci.regs = (struct ohci_regs *)CONFIG_SYS_USB_OHCI_REGS_BASE;
 #endif
 
 	gohci.flags = 0;
-	gohci.slot_name = CFG_USB_OHCI_SLOT_NAME;
+	gohci.slot_name = CONFIG_SYS_USB_OHCI_SLOT_NAME;
 
 	if (hc_reset (&gohci) < 0) {
 		hc_release_ohci (&gohci);
 		err ("can't reset usb-%s", gohci.slot_name);
-#ifdef CFG_USB_OHCI_BOARD_INIT
+#ifdef CONFIG_SYS_USB_OHCI_BOARD_INIT
 		/* board dependant cleanup */
 		usb_board_init_fail();
 #endif
 
-#ifdef CFG_USB_OHCI_CPU_INIT
+#ifdef CONFIG_SYS_USB_OHCI_CPU_INIT
 		/* cpu dependant cleanup */
 		usb_cpu_init_fail();
 #endif
@@ -1901,12 +1901,12 @@
 		err ("can't start usb-%s", gohci.slot_name);
 		hc_release_ohci (&gohci);
 		/* Initialization failed */
-#ifdef CFG_USB_OHCI_BOARD_INIT
+#ifdef CONFIG_SYS_USB_OHCI_BOARD_INIT
 		/* board dependant cleanup */
 		usb_board_stop();
 #endif
 
-#ifdef CFG_USB_OHCI_CPU_INIT
+#ifdef CONFIG_SYS_USB_OHCI_CPU_INIT
 		/* cpu dependant cleanup */
 		usb_cpu_stop();
 #endif
@@ -1932,13 +1932,13 @@
 	/* call hc_release_ohci() here ? */
 	hc_reset (&gohci);
 
-#ifdef CFG_USB_OHCI_BOARD_INIT
+#ifdef CONFIG_SYS_USB_OHCI_BOARD_INIT
 	/* board dependant cleanup */
 	if(usb_board_stop())
 		return -1;
 #endif
 
-#ifdef CFG_USB_OHCI_CPU_INIT
+#ifdef CONFIG_SYS_USB_OHCI_CPU_INIT
 	/* cpu dependant cleanup */
 	if(usb_cpu_stop())
 		return -1;